NEC Electra Elite IPK - Page 402

Electra Elite IPK Document Revision 4
Programming Manual 2 - 325
___________________________________________________________________________________
___________________________________________________________________________________
 Notes 
1-14-01
ARS Dialing Assignment
1-14-02
ARS Dial Allow/Deny Selection
1-14-03
ARS Route Table Number Assignment
1-14-05
ARS Digit Delete Assignment
1-14-06
ARS Digit Add Assignment
1-14-07
ARS Max Digit Assignment
1. When NORMAL is selected, the call is routed to Trunk Group 1 exactly as dialed.
2. ICM is used when the open numbering plan is used (K-CCIS).
Related Programming
M.B. Number Memory Block Name