Electra Elite IPK Document Revision 4
Programming Manual 2 - 369
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1-15-05
Destination Point Code Transfer Assignment
1-15-06
Originating Office Code Number Assignment
1-15-07
K-CCIS Message Response Timeout Assignment
1-15-08
Link Reconnect Allow/Deny Selection
1-15-09
K-CCIS Maximum Call Forwarding Hop Assignment
1-15-10
Calling Name Display Allow/Deny Selection
1-15-11
Centralized Billing Allow/Deny Selection
1-15-12
Centralized Billing – Point Code of Center Office Assignment
1-15-13
Centralized Day/Night Switching for Remote Office Assignment
1-15-14
Centralized Day/Night Switching for Main Office Assignment
1-15-15
Centralized BLF Send Point Code Assignment
1-15-16
Centralized BLF Send Extension Number Assignment
1-15-18
Centralized BLF Display Extension Number Assignment
3-70
CIC Number Assignment
4-12
Line Key Selection for Telephone Mode
4-17
Station to Class of Service Feature Selection
5-05
Common Signaling Channel Route Selection
The BLF messages are sent in a four-second cycle (at default), so some delay occurs to change the indication in the
destination office. In the network configured with two systems, it can take four to five seconds (at default) to change
the BLF indication in the destination office.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
