2 - 422 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
Notes
3 Press the CO/PBX Line key. The LED indication changes to indicate the data
each time the CO/PBX line key is pressed.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter number data
C to go to next page
A to go to previous page
D to go to the next assigned Tenant No.
Default Values
All Speed Dial confirmation allowed
4 After entering data for both pages, press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-35
Speed Dial Buffer Allocation
1-8-07
Class of Service (Attendant) Feature Selection 1
1. When Deny is specified, no display is presented even when a System Speed Dial call is originated.
2. Divide the Speed Dial numbers into groups and specify, per tenant, whether confirmation is allowed or denied.
3. Station Message Detail Recording (SMDR) prints telephone numbers.
Programming Procedures (Continued)
CO/PBX
Line LED
Off On
Data No (Not Assigned) Yes (Assigned)
The shaded
selection is the
default.
To Next Page
Loading...
