Electra Elite IPK Document Revision 4
Programming Manual 2 - 431
___________________________________________________________________________________
___________________________________________________________________________________
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
Notes
1. Only trunks assigned to TANDM TRF in this Memory Block are set or canceled for Automatic Trunk-to-Trunk
Transfer Mode when an attendant position enters 00 during the set or cancel operation.
For example:
To set Automatic Trunk-to-Trunk Transfer Mode from an attendant position:
Press
A +
FA
+
KK
+ A .
To cancel Automatic Trunk-to-Trunk Transfer Mode from an attendant position:
Press
A +
FB
+
KK
+ A .
2. Only trunks assigned to AA in this Memory Block are set or canceled for Automated Attendant/DISA Mode when
an attendant position enters 00 during the set or cancel operation.
For example:
To set Automated Attendant/DISA Mode from an attendant position:
Press
A +
HA
+
KK
+ A .
To cancel Automated Attendant/DISA Mode from an attendant position:
Press
A +
HB
+
KK
+ A .
To Next Page
Loading...
