Electra Elite IPK Document Revision 4
Programming Manual 2 - 437
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1. Line keys 1~4 identify the following methods of loop supervision:
1 = Second Dial Tone
2 = Immediate Start
3 = Delay Dial
4 = Wink Start
2. This Memory Block affects T1 channels assigned as Tie lines.
3. When a second dial tone is selected, the distant system provides the dial tone.
4. When Immediate, Delay, or Wink is selected, the local system provides the dial tone.
To Next Page
Loading...
