Electra Elite IPK Document Revision 4
Programming Manual 2 - 497
___________________________________________________________________________________
___________________________________________________________________________________
Notes
Related Programming
M.B. Number Memory Block Name
3-50
ISDN Line SPID Assignment
3-52
ISDN Trunk Directory Number Assignment
3-91
Trunk Type Selection
1-1-20
DID Digit Length Selection
1-1-21
DID Digit Conversion Assignment
1-1-22
DID Digit Conversion Table
1-1-23
DID Forward Station Number for Busy Station or Undefined Digit
1. R4000 or higher is required to support this Memory Block.
2. When YES is selected, the BRT/PRT allows only a Directory Number as assigned in Memory Block 3-52 (ISDN
Trunk Directory Number Assignment).
3. When NO is selected, the BRT/PRT always passes the Directory Number to the CPU.
4. This Memory Block can be used to make the ISDN-BRI trunks into DID when set to YES.
5. When this Memory Block is changed, the ISDN-BRI ETU must be reset.
6. When this Memory Block is changed, from YS to NO or NO to YS, the appropriate BRT ETU must be reset.
To Next Page
Loading...
