NEC Electra Elite IPK - Page 591

2 - 514 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
 Notes 
Related Programming
M.B. Number Memory Block Name
1-1-46
Access Code (1-Digit) Assignment
1-1-47
Access Code (2-Digit) Assignment
1-1-48
Access Code (3-Digit) Assignment
1-2-03
2~7-Digit Station Number Selection
1-2-24
Expanded Station Number Assignment
1. Station Number Assignment is per station. A station number cannot be assigned to more than one telephone. A
telephone cannot have more than one station number.
2. When changing Station Numbers to a different numbering plan perform the following steps in order.
a. Select Station Numbers using Memory Block 1-2-03 (2-,3-, or 4-digit Station Number Selection).
b. Program applicable Access Code in Memory Block 1-1-46 [Access Code (1-Digit) Assignment], 1-1-47
[Access Code (2-Digit) Assignment], or 1-1-48 [Access Code (3-Digit) Assignment].
c. Program all Station Numbers using this Memory Block.
3. Telephone ports A0~C0 are ports 100~120.
4. When 5-, 6-, or 7-digit Extension Numbers are used, the leading digits are assigned in Memory Block 1-2-34
(Expanded Station Number Assignment) and are displayed in this Memory Block when assigned.
5. When 5-, 6-, or 7-digit Extension Numbers are used, only the last four digits are assigned in this Memory Block.