Electra Elite IPK Document Revision 4
Programming Manual 2 - 529
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1. While an internal line is ringing or in use, the station number and name of the other party are displayed.
2. The name is not displayed when Tone Override, Automatic Callback, or Callback Request is displayed.
3. Only six digits/characters can be used for each name.
4. Telephone ports A0~C0 are ports 100~120.
5. Refer to Appendix B Character Codes, Section 1 Character Assignment on page B-1 for the procedure for
entering station names using the dial pad instead of the ASCII Character Code Tables.
6. R4000 or higher is required to support 16 characters for the Station Name.
To Next Page
Loading...
