NEC Electra Elite IPK - Page 672

Electra Elite IPK Document Revision 4
Programming Manual 2 - 595
___________________________________________________________________________________
___________________________________________________________________________________
 Notes 
Related Programming
M.B. Number Memory Block Name
7-2
Telephone Type Assignment
4-50
Multiline Terminal Type Selection
1. Telephone Ports A0~C0 are ports 100~120.
2. The name can be entered using the dial pad. Follow the procedure in Appendix B Character Codes.
3. Maximum of 120 Station Add-On Consoles.
4. The Station Add-On Console cannot be connected to a 32-button terminal.
5. The Station Add-On Console can be used only for DSS/BLF keys. COs cannot be assigned to the Station
Add-On Console.
6. When using the Station Add-On Console, Memory Block 4-50 (Multiline Terminal Type Selection) should be
assigned as a 16-button terminal for the ports that have the Station Add-On Console connected.
7. The Station Add-On Console can be connected only to a –X Terminal or higher.