1 - 38 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
09 Telephone to Tenant Assignment 00 (All Tenant
Telephones)
Tenant Number
10 Station Number Assignment 100 Refer to 4-10 Station Number
Assignment on page 2-513.
11 Ringing Line Preference Selection YS NO, YS
12 Line Key Selection for Telephone
Mode
CO Refer to 4-12 Line Key Selection for
Telephone Mode on page 2-517.
13 CO/PBX Busy Forward Station
Assignment
Not Specified N/A
14 Intercom Master Hunt Number
Selection
NO NO, YS
15 Intercom Master Hunt Number
Forward Assignment
No Telephones
Specified
Station Number (2~7 digits)
17 Station to Class of Service Feature
Assignment
00 Refer to 4-17 Station to Class of
Service Feature Assignment on page
2-526.
18 Station Name Assignment Not Specified Up to six digits /characters (R3500 or
lower)
Up to 16 digits /characters (R4000/
R4500 or higher)
19 Trunk Outgoing Restriction LEDs Off Off = Not Restricted
On = Restricted
23 Prime Line/Hot Line Assignment Not Specified Up to 10 digits
24 SLT Hookflash Assignment HOLD HOLD, DISC
26 DISA ID Number Station
Assignment
01 Refer to 4-26 DISA ID Number Station
Assignment on page 2-536.
28 Multilingual LCD Indication
Selection
ENG JAPA, FREN, ENG, SPAN
29 HFU Selection NO NO, YS
30 Hold/Transfer Recall Display
Selection
YS YS, NO
31 Receiving Internal/All Call Page
Selection
YS YS, NO
LK 4 Telephone Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values
To Next Page
Loading...
