Electra Elite IPK Document Revision 4
Programming Manual 3 - 43
___________________________________________________________________________________
___________________________________________________________________________________
3-92 Co line 24 set to NIL (Not installed)
4-12 TEL ports 01, 02 (Ext. 100,101), LK01~23, C
(CAP)01~23
4-40 Set TEL ports 01, 02 (Ext. 100,101) to CLS 1
4-50 24 Line Keys
1-10-20 Group 01 to 08 MEGACOM (AT&T)
Group 02 to 05 MEGACOM800 (AT&T)
Group 03 to 02 MultiQuest (AT&T)
Group 04 to 02 Tie (Nortel)
Group 05 to 02 FX (Nortel)
Group 06 to 01 ACCUNET (AT&T)
(Future)
Group 07 to 03 OUTWATS (Nortel)
Group 08~16 to 99 (default)
1-10-21 Group 01 to 10 MEGACOM (AT&T)
Group 02 to 05 MEGACOM800 (AT&T)
Group 03 to 02 MultiQuest (AT&T)
Group 04 to 03 Tie (Nortel)
Group 05 to 03 FX (Nortel)
Group 06 to 01 ACCUNET (AT&T)
(Future)
Group 07 to 03 OUTWATS (Nortel)
Group 08~16 to 99 (default)
1-10-22 SFG05 to CO
Other SFGs remain in DID
3-42 Set CO 01~23 to TEL 101
3-43 CO 01~23 unassigned
Call by Call Memory Block Data Table (Example Only)
Refer to the Memory Block Data table.
AT&T and Nortel are mixed in this example even though in reality this is
impossible.
To Next Page
Loading...
