NEC Electra Elite IPK - Page 94

Electra Elite IPK Document Revision 4
Programming Manual 2 - 17
___________________________________________________________________________________
___________________________________________________________________________________
 Notes 
1. When a user seizes a CO/PBX line and dials 907 4000 + B + 12345 with this Memory Block set to NO,
the system interprets the sequence as:
9074000XXX345 (XXX =
B and 12 is interpreted as Speed Dial buffer 12).
2. When a user seizes a CO/PBX line and dials 907 4000 +
B + 12345 with this Memory Block set to YS,
the system interprets the sequence as:
9074000XXX12345 (XXX = is interpreted as a pause).
3. The pause is inserted when Last Number Redial, Save and Repeat, or Store and Repeat is used to redial the
number.
4. When this feature is allowed, Multiline Terminal users cannot use consecutive Speed Dial using
B .