Name: Planet SGS-6341-24T4X
Brand: Planet
Rating: 4 (1 reviews)

To Next Page

To Previous Page

52-8

52.12 radius-server authentication host

Command:

radius-server authentication host {<ipv4-address> | <ipv6-address>} [port <port-number>]

[key <string>] [primary] [access-mode {dot1x | telnet}]

no radius-server authentication host {<ipv4-address> | <ipv6-address>}

Function:

Specifies the IPv4 address or IPv6 address and listening port number, cipher key, whether be

primary server or not and access mode for the RADIUS server; the no command deletes the

RADIUS authentication server.

Parameters:

<ipv4-address> | <ipv6-address> stands for the server IPv4/IPv6 address;

<port-number> for listening port number, from 0 to 65535, where 0 stands for non-authentication

server usage;

<string> is cipher key string;

primary for primary server. Multiple RADIUS Sever can be configured and would be available.

RADIUS Server will be searched by the configured order if primary is not configured, otherwise, the

specified RADIUS server will be used last.

[access-mode {dot1x|telnet}] designates the current RADIUS server only use 802.1x

authentication or telnet authentication, all services can use current RADIUS server by default.

Command mode:

Global Mode

Default:

No RADIUS authentication server is configured by default.

Usage Guide:

This command is used to specify the IPv4 address or IPv6 address and port number, cipher key

string and access mode of the specified RADIUS server for switch authentication, multiple

command instances can be configured. The port parameter is used to specify authentication port

number, which must be the same as the specified authentication port in the RADIUS server, the

default port number is 1812. If this port number is set to 0, the specified server is regard as

non-authenticating. This command can be used repeatedly to configure multiple RADIUS servers

communicating with the switch, the configured order is used as the priority for the switch

authentication server. When the first server has responded (whether the authentication is

successed or failed), switch does not send the authentication request to the next. If primary is

specified, then the specified RADIUS server will be the primary server. It will use the cipher key

which be configured by radius-server key <string> global command if the current RADIUS server

not configure key<string>. Besides, it can designate the current RADIUS server only use 802.1x

authentication or telnet authentication via access-mode option. It is not configure access-mode

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990