Planet SGS-6341-24T4X - Show Gvrp Port-Member

12-58
Default:
leavetimer is disabled.
Usage Guide:
Show running state and expiration time of each leave timer.
Example:
Show running state and expiration time of each leave timer on current port.
Switch#show gvrp leavetimer running information interface ethernet 1/0/1
VLANID running state expired time
------------ ---------- ---------
100 UP 0.2 s
300 DOWN non
12.1.19 show gvrp port-member
Command:
show gvrp (active|) port-member
Function:
Shows all ports with GVRP enabled. “active” means the port is in active state with GVRP enabled.
Parameter:
active means the port is in active state
Command mode:
Admin Mode.
Default:
GVRP is disabled on port.
Usage Guide:
Show all ports (enable GVRP) saved in GVRP.
Example:
Show all ports with GVRP enabled.
Switch#show gvrp port member
Ports which were enabled gvrp included：
Ethernet1/0/3（T） Ethernet1/0/4（T）
Ethernet1/0/5（T） Ethernet1/0/6（T）
Ethernet1/0/7（T） Ethernet1/0/8（T）
Ethernet1/0/9（T） Ethernet1/0/10（T）