Planet SGS-6341-24T4X User Manual

SGS-6341 Series Command Guide
1-76
Example:
Enable SSH function on the switch.
Switch(config)#ssh-server enable
1.2.14 ssh-server host-key create rsa
Command:
ssh-server host-key create rsa [modulus < modulus >]
Function:
Generate new RSA host key.
Parameter:
modulus is the modulus which is used to compute the host key; valid range is 768 to 2048. The default value is
1024.
Command mode:
Global Mode
Default:
The system uses the key generated when the ssh-server is started at the first time.
Usage Guide:
This command is used to generate the new host key. When SSH client logs on the server, the new host key is used
for authentication. After the new host key is generated and “write” command is used to save the configuration, the
system uses this key for authentication all the time. Because it takes quite a long time to compute the new key and
some clients are not compatible with the key generated by the modulus 2048, it is recommended to use the key
which is generated by the default modulus 1024.
Example:
Generate new host key.
Switch(config)#ssh-server host-key create rsa
1.2.15 ssh-server max-connection
Command:
ssh-server max-connection {<max-connection-number>|default}
Function:
Configure the max connection number supported by the SSH service of the switch.
Parameters:
<max-connection-number>: the max connection number supported by the SSH service, ranging from 5 to 16. The
default option will restore the default configuration.

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g