19-197
Rcvd: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo replies
IPv6 data report statistics
Rcvd: 90 total, 17 local destination0
header errors, 0 address errors0 unknown
IPv6 received packets statistics
Frags: 0 reassembled, 0 timeouts
0 fragment rcvd, 0 fragment dropped0
fragmented, 0 couldn't fragment, 0
fragment sent
IPv6 fragmenting statistics
Sent: 110 generated, 0 forwarded
IPv6 sent packets statistics
19.2.36 show ipv6 redirect
Command:
show ipv6 redirect
Function:
Display the state IPv6 redirect switch.
Command Mode:
Admin Mode.
Usage Guide:
This command can be used to check whether the IPv6 redirect function in the system is enabled.
Examples:
Switch# show ipv6 redirect
ipv6 redirect is disabled
19.2.37 show ipv6 tunnel
Command:
show ipv6 tunnel [<tnl-id>]
Function:
Display tunnel information.
Parameter: