Planet SGS-6341-24T4X - Switchport Interface; Switchport Mode

12-66
12.1.29 switchport interface
Command:
switchport interface [ethernet | portchannel] [interface-name | interface-list]
no switchport interface [ethernet | portchannel] [interface-name | interface-list]
Function:
Specify Ethernet port to VLAN; the no command deletes one or one set of ports from the specified
VLAN.
Parameter:
ethernet is the Ethernet port to be added. portchannel means that the port to be added is a
link-aggregation port. interface-name port name, such as e1/0/1. If this option is selected, ethernet
or portchannel should not be. interface-list is the port list to be added or deleted, “;” and “-” are
supported, for example: ethernet1/0/1;3;4-7;8.
Command mode:
VLAN Mode.
Default:
A newly created VLAN contains no port by default.
Usage Guide:
Access ports are normal ports and can join a VLAN, but a port can only join one VLAN for a time.
Example:
Assign Ethernet port 1, 3, 4-7, 8 of VLAN100.
Switch(Config-Vlan100)#switchport interface ethernet 1/0/1;3;4-7;8
12.1.30 switchport mode
Command:
switchport mode {trunk | access | hybrid}
Function:
Set the port in access mode, trunk mode or hybrid mode.
Parameter:
trunk means the port allows traffic of multiple VLAN; access indicates the port belongs to one
VLAN only; hybrid means the port allows the traffic of multi-VLANs to pass with tag or untag mode.
Command mode:
Port Mode.