Planet SGS-6341-24T4X - Router Rip

33-159
Switch# config terminal
Switch(config)# router rip
Switch(config-router)# redistribute kernel route-map ipi
To redistribute OSPFv2 routing information to RIP.
Switch(config)# router rip
Switch(config-router)# redistribute ospf 2
33.32 route
Command:
route <A.B.C.D/M>
no route <A.B.C.D/M>
Function:
This command configures a static RIP route. The “no route <A.B.C.D/M>“command deletes this
route.
Parameter:
Specifies this destination IP address prefix and its length.
Command Mode:
Router mode
Usage Guide:
The command add a static RIP route, and is mainly used for debugging. Routes configured by this
command will not appear in kernel route table but in the RIP route database.
Example:
Switch# config terminal
Switch(config)# router rip
Switch(config-router)# route 1.0.0.0/8
33.33 router rip
Command:
router rip
no router rip
Function:
Enable the RIP routing process and enter the RIP mode; the “no router rip” command closes the