Planet SGS-6341-24T4X - Clear Ipv6 Dhcp Binding; Clear Ipv6 Dhcp Conflict

27-41
Chapter 27 Commands for DHCPv6
27.1 clear ipv6 dhcp binding
Command:
clear ipv6 dhcp binding [<ipv6-address>] [pd <ipv6-prefix | prefix-length>]
Function:
To clear one specified DHCPv6 assigned address binding record or all the IPv6 address binding
records.
Parameter:
<ipv6-address> is the specified IPv6 address with binding record; <ipv6-prefix| prefix-length> is
the specified IPv6 prefix with binding record; To clear all IPv6 address binding record if there is no
specified record.
Command Mode:
Admin Configuration Mode.
Usage Guide:
DHCPv6 IPv6 address binding information can be displayed through the command show ipv6
dhcp binding. If DHCPv6 client does not use the DHCPv6 allocated IPv6 address but when the life
time of the IPv6 address does not end, the DHCPv6 server will not remove its bind for this address.
In this situation, the address binding information can be removed manually through this command;
and if no parameter is appended, this command will remove all the address binding information,
then all addresses and prefix will be assigned again in the DHCPv6 address pool.
Example:
To delete all binding record of IPv6 address and prefix.
Switch# clear ipv6 dhcp binding
Relative Command:
show ipv6 dhcp binding
27.2 clear ipv6 dhcp conflict
Command:
clear ipv6 dhcp conflict [<address>]
Function:
Clear the address with the conflict record in address conflict log.
Parameter: