Planet SGS-6341-24T4X - Ntp Enable

69-7
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)#ntp disable
69.13 ntp enable
Command:
ntp enable
ntp disable
Function:
To enable/disable NTP function globally.
Default:
Disabled.
Command Mode:
Global Mode.
Example:
To enable NTP function.
Switch(config)#ntp enable
69.14 ntp ipv6 multicast client
Command:
ntp ipv6 multicast client
no ntp ipv6 multicast client
Function:
Configure the specified interface to receive IPv6 NTP multicast packets, the no command will
cancels the specified interface to receive IPv6 NTP multicast packets.
Command mode:
Interface mode
Default:
Interface does not receive IPv6 NTP multicast packets.
Example:
Enable the function for receiving IPv6 NTP multicast packets on vlan1 interface.
Switch(Config)# interface vlan 1
Switch(Config-if-Vlan1)#ntp ipv6 multicast client