Planet SGS-6341-24T4X - Show Dot1 X

48-16
Switch(config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#dot1x enable
48.24 show dot1x
Command:
show dot1x [interface <interface-list>]
Function:
Displays dot1x parameter related information, if parameter information is added, corresponding
dot1x status for corresponding port is displayed.
Parameters:
<interface-list> is the port list. If no parameter is specified, information for all ports is displayed.
Command mode:
Admin and Configuration Mode.
Usage Guide:
The dot1x related parameter and dot1x information can be displayed with “show dot1x” command.
Example:
1. Display information about dot1x global parameter for the switch.
Switch#show dot1x
Global 802.1x Parameters
reauth-enabled no
reauth-period 3600
quiet-period 10
tx-period 30
max-req 2
authenticator mode passive
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable
dot1x-privateclient Disable
dot1x-unicast Disable
802.1x is enabled on ethernet Ethernet1/0/1
Authentication Method:Port based
Max User Number:1