Planet SGS-6341-24T4X - Ip Access Standard

47-13
47.11 ip access standard
Command:
ip access standard <name>
no ip access standard <name>
Function:
Create a named standard access list. The no prefix will remove the named standard access list
including all the rules in the list.
Parameters:
<name> is the name of the access list. The name can be formed by non-all-digit characters of
length of 1 to 32.
Command Mode:
Global Mode.
Default:
No access list is configured by default.
Usage Guide:
When this command is issued for the first time, an empty access list will be created.
Example:
To create a standard IP access list name ipFlow.
Switch(config)#ip access-list standard ipFlow
47.12 ipv6 access-list
Command:
ipv6 access-list <num-std> {deny | permit} {<sIPv6Prefix/sPrefixlen> | any-source |
{host-source <sIPv6Addr>}}
ipv6 access-list <num-ext> {deny | permit} icmp {{ <sIPv6Prefix/sPrefixlen> } | any-source |
{host-source <sIPv6Addr> }} { <dIPv6Prefix/dPrefixlen> | any-destination | {host-destination
<dIPv6Addr> }} [ <icmp-type> [ <icmp-code> ]] [dscp <dscp> ] [flow-label <fl> ][time-range
<time-range-name> ]
ipv6 access-list <num-ext> {deny | permit} tcp {{ <sIPv6Prefix/<sPrefixlen> } | any-source |
{host-source <sIPv6Addr> }} [s-port { <sPort> | range <sPortMin> <sPortMax> }]
{{ <dIPv6Prefix/<dPrefixlen> } | any-destination | {host-destination <dIPv6Addr> }} [dPort
{ <dPort> | range <dPortMin> <dPortMax> }] [syn | ack | urg | rst | fin | psh] [dscp <dscp> ]
[flow-label <flowlabel> ][time-range <time-range-name> ]
ipv6 access-list <num-ext> {deny | permit} udp {{ <sIPv6Prefix/<sPrefixlen> } | any-source |