Planet SGS-6341-24T4X - Page 947

47-14
{host-source <sIPv6Addr> }} [s-port { <sPort> | range <sPortMin> <sPortMax> }]
{{ <dIPv6Prefix/<dPrefixlen> } | any-destination | {host-destination <dIPv6Addr> }} [dPort
{ <dPort> | range <dPortMin> <dPortMax> }] [dscp <dscp> ] [flow-label
<flowlabel> ][time-range <time-range-name> ]
ipv6 access-list <num-ext> {deny | permit} <next-header> { <sIPv6Prefix/sPrefixlen> |
any-source | {host-source <sIPv6Addr> }} { <dIPv6Prefix/dPrefixlen> | any-destination |
{host-destination <dIPv6Addr> }} [dscp <dscp> ] [flow-label <fl> ][time-range
<time-range-name> ]
no ipv6 access-list { <num-std> | <num-ext> }
Functions:
Creates a numbered standard IP access-list, if the access-list already exists, then a rule will add to
the current access-list; the “no access-list {<num-std>|<num-ext>} “command deletes a
numbered standard IP access-list.
Parameters:
<num-std> is the list number, list range is between 500～599; <num-ext> is the list number, list
range is between 600～699; <sIPv6Prefix> is the prefix of the ipv6 source address; <sPrefixlen>
is the length of prefix of the ipv6 source address, range is between 1～128; <sIPv6Addr> is the
ipv6 source address; <dIPv6Prefix> is the prefix of the ipv6 destination address; <dPrefixlen> is
the length of prefix of the ipv6 destination address, range is between 1～128; <dIPv6Addr> is the
ipv6 destination address; <icmp-type>, the type of icmp; <icmp-code>，the protocol code of icmp;
<dscp>，IPv6 priority, range from 0 to 63; <flowlabel>，value of flow tag, range from 0 to 1048575;
syn
，
ack
，
urg
，
rst
，
fin
，
psh
，
tcp label position; <sPort>, source port No., 0-65535; <sPortMin>,
the down boundary of source port; <sPortMax>, the up boundary of source port; <dPort>，
destination port No., range from 0 to 65535; <dPortMin>, the down boundary of destination port;
<dPortMax>, the up boundary of destination port; <next-header>，the next header of IPv6, range
from 0 to 255; <time-range-name>, the name of time-range.
Command Mode:
Global Mode.
Default:
No access-list configured.
Usage Guide:
Creates a numbered 520 standard IP access-list first time, the following configuration will add to the
current access-list.
Examples:
Creates a numbered 520 standard IP access-list, allow the source packet from 2003:1:2:3::1/64
pass through the net, and deny all the other packet from the source address 2003:1:2::1/48 pass
through.