Planet SGS-6341-24T4X - Show Lldp Traffic

8-12
8.19 show lldp traffic
Command:
show lldp traffic
Function:
Display the statistics of LLDP data packets.
Default:
Do not display the statistics of LLDP data packets.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the statistics of LLDP data packets by using “show lldp traffic”.
Example:
Check the statistics of LLDP data packets after LLDP is enabled on the switch.
Switch(config)#show lldp traffic
PortName Ageouts FramesDiscarded FramesInErrors FramesIn FramesOut
TLVsDiscarded TLVsUnrecognized -------------- ------- --------------- --------------
-------- --------- ------------- ----------------
Ethernet1/1 0 0 0 0 7 0
0