Planet SGS-6341-24T4X - Debug Cluster; Debug Cluster Packets

SGS-6341 Series Command Guide
3-118
Command mode:
Admin Mode
Usage Guide:
The commander distributes the remote upgrade command to members via the TCP connections between them,
causing the number to implement the remote upgrade and reboot. Trying to execute this command on a
non-commander switch will return errors. If users want to upgrade more than one member, these switches should be
the same type to avoid boot failure induced by mismatched IMG files.
Example:
Remotely upgrade a member switch from the commander switch, with the member-id being 1, src-ul being ftp://
switch:switch@192.168.1.1/nos.img, and dst-url being nos.img
Switch#cluster update member 1 ftp:// switch:switch@192.168.1.1/nos.img nos.img
3.12 debug cluster
Command:
debug cluster {statemachine | application | tcp}
no debug cluster {statemachine | application | tcp}
Function:
Enable the application debug of cluster; the no operation of this command will disable that.
Parameters:
statemachine: print debug information when the switch status changes.
application: print debug information when there are users trying to configure the switch after logging onto it via SNMP,
WEB.
tcp: the TCP connection information between the commander members.
Command Mode:
Admin Mode.
Example:
Enable the debug information of status change on the switch.
Swtich#debug cluster statemachine
3.13 debug cluster packets
Command:
debug cluster packets {DP | DR | CP} {receive | send}
no debug cluster packets {DP | DR | CP} {receive | send}
Function: