Planet SGS-6341-24T4X - Debug Ospf Route

35-196
Default:
Closed
Command Mode:
Admin mode and global mode
Example:
Switch#debug ospf packet hello
35.17 debug ospf route
Command:
debug ospf route [ase|ia|install|spf]
no debug ospf route [ase|ia|install|spf]
Function:
Open debugging switches showing OSPF related routes; the “no debug ospf route
[ase|ia|install|spf]” command closes this debugging switch.
Default:
Closed
Command Mode:
Admin mode and global mode
Example:
Switch#debug ospf route spf
35.18 debug ospf redistribute message send
Command:
debug ospf redistribute message send
no debug ospf redistribute message send
Function:
To enable debugging of sending command from OSPF process redistributed to other OSPF process
routing. The no form of command disables debugging of sending command from OSPF process
redistributed to other OSPF process routing.
Default:
Disabled.
Command Mode:
Admin Mode.