Planet SGS-6341-24T4X User Manual

14-112
Example:
Configure port 1/0/2 as loopguard mode for instance 0.
Switch(Config)#interface ethernet 1/0/2
Switch(Config-Ethernet-1/0/2)#spanning-tree mst 0 loopguard
Switch(Config-Ethernet-1/0/2)#
14.1.22 spanning-tree mst port-priority
Command:
spanning-tree mst <instance-id> port-priority <port-priority>
no spanning-tree mst <instance-id> port-priority
Function:
Set the current port priority for the specified instance; the command “no spanning-tree mst
<instance-id> port-priority” restores the default setting.
Parameter:
<instance-id> sets the instance ID. The valid range is from 0 to 48; <port-priority> sets port priority.
The valid range is from 0 to 240. The value should be the multiples of 16, such as 0, 16, 32…240.
Command mode:
Port Mode
Default:
The default port priority is 128.
Usage Guide:
By setting the port priority, users can control the port ID of the instance in order to control the root
port and designated port of the instance. The lower the value of the port priority is, the higher the
priority is.
Example:
Set the port priority as 32 on the port 1/0/2 for the instance 1.
Switch(config)#interface ethernet 1/0/2
Switch(Config-If-Ethernet1/0/2)#spanning-tree mst 1 port-priority 32
14.1.23 spanning-tree mst priority
Command:
spanning-tree mst <instance-id> priority <bridge-priority>
no spanning-tree mst <instance-id> priority
Function:
Set the bridge priority for the specified instance; the command “no spanning-tree mst

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g