Planet SGS-6341-24T4X - Switchport Subnet-Vlan Enable; Commands for Voice Vlan Configuration; Show Voice-Vlan

12-82
12.2.14 switchport subnet-vlan enable
Command:
switchport subnet-vlan enable
no switchport subnet-vlan enable
Function:
Enable the IP-subnet-based VLAN on the port; the “no” form of this command disables the
IP-subnet-based VLAN function on the port.
Command Mode:
Port Mode.
Default:
The IP-subnet-based VLAN is enabled on the port by default.
Usage Guide:
After adding the IP subnet to specified VLAN, the IP-subnet-based VLAN function will be globally
enabled. This command can disable the IP-subnet-based VLAN function on specified port to meet
special user applications.
Example:
Disable the IP-subnet-based VLAN function on port1.
Switch#config
Switch(config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#no switchport subnet-vlan enable
12.3 Commands for Voice VLAN Configuration
12.3.1 show voice-vlan
Command:
show voice-vlan
Function:
Display the configuration status of the Voice VLAN on the switch.
Command Mode:
Admin Mode and other Configuration Mode.
Usage Guide:
Display Voice VLAN Configuration.