Planet SGS-6341-24T4X User Manual

SGS-6341 Series Command Guide
1-71
1.2.5 authentication securityipv6
Command:
authentication securityipv6 <ipv6-addr>
no authentication securityipv6 <ipv6-addr>
Function:
To configure the trusted IPv6 address for Telnet and HTTP login method. The no form of this command will remove
the specified configuration.
Parameters:
<ipv6-addr> is the trusted IPv6 address which can login the switch.
Default:
No trusted IPv6 addresses are configured by default.
Command Mode:
Global Mode.
Usage Guide:
IPv6 address of the client which can login the switch is not restricted before the trusted IPv6 address is not
configured. After the trusted IPv6 address is configured, only clients with trusted IPv6 addresses are able to login the
switch. Up to 32 trusted IPv6 addresses can be configured in the switch.
Example:
Configure the secure IPv6 address is 2001:da8:123:1::1.
Switch(config)# authentication securityipv6 2001:da8:123:1::1
1.2.6 authorization
Command:
uthorization line {console | vty | web} exec {local | radius | tacacs}
no authorization line {console | vty | web} exec
Function:
Configure VTY (login with Telnet and SSH), Web and Console, so as to select the priority of the authorization mode
for the login user. The no form command restores the default authorization mode.
Default:
There is no authorization mode.
Command Mode:
Global Mode.
Usage Guide:
The authorization method for Console, VTY and Web login can be configured respectively. And authorization method
can be any one or combination of Local, RADIUS or TACACS. When login method is configuration in combination,
the preference goes from left to right. If the users have passed the authorization method, authorization method of

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g