37-334
Example:
Switch#show ipv6 bgp redistribute
37.109 timers bgp
Command:
timers bgp <0-65535> <0-65535>
no timers bgp [<0-65535> <0-65535>]
Function:
Configure all neighbor time in BGP. The “no timers bgp [<0-65535> <0-65535>]” command
restores these times to default value.
Parameter:
<0-65535> Respectively the KEEPALIVE interval and the hold time.
Default:
KEEPALIVE is 60s, HOLD TIME is 240s.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Similar to neighbor time configuration which just performed on all neighbors
Example:
Switch(config-router)# timers bgp 50 200
Relevant Commands:
neighbor timers, no neighbor timers
To Next Page
Loading...
