Planet SGS-6341-24T4X - Page 694

37-333
Origin incomplete, metric 6, localpref 100, valid, external, best
Last update: 00:41:47
37.107 show ip bgp vpnv4
Command:
show ip bgp vpnv4 {all | rd <rd-val> | vrf <vrf-name>}
Function:
Display all VRF route messages or the specific VRF route message.
Parameter:
all: All VPNv4 peers;
rd-val: is the route identification label which is normally the （AS number or IP address）: digits,
such as 100:10;
rf-name: is the name of VRF, created through if vrf <vrf-name> command.
Command Mode:
All modes
Usage Guide:
Available to display by specified RD or VRF.
Example:
Switch#show ip bgp vpn4 all
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 100:10 (Default for VRF DC1)
*> 11.1.1.0/24 11.1.1.64 0 0 200 ?
*> 20.1.1.0/24 11.1.1.64 0 0 200 ?
37.108 show ipv6 bgp redistribute
Command:
show ipv6 bgp redistribute
Function:
Show the configuration information of redistribution other out routing to MBGP4+.
Default:
Not shown by default.
Command Mode:
Admin Mode and Configuration Mode.