12-52
Parameter:
join, join timer
leave, leave timer
leaveAll, leaveAll timer
Command mode:
Global mode
Default:
200 | 600 | 10000 milliseconds for join | leave | leaveall timer respectively.
Usage Guide:
Check whether the default value satisfy the range. If so, modify the value of garp join | leave |
leaveAll timer to the default value, otherwise return a configuration error.
Example:
Restore garp timer to the default value.
Switch(config)#no garp timer leaveall
12.1.11 name
Command:
name <vlan-name>
no name
Function:
Specify a name, a descriptive string, for the VLAN; the no operation of the command will delete the
name of the VLAN.
Parameters:
<vlan-name> is the specified name string.
Command Mode:
VLAN Configuration Mode.
Default:
The default VLAN name is vlanXXX, where xxx is VID.
Usage Guide:
The switch can specify names for different VLANs, making it easier for users to identify and manage
VLANs.
Examples:
Specify the name of VLAN100 as TestVlan.
Switch(Config-Vlan100)#name TestVlan
To Next Page
Loading...
