Planet SGS-6341-24T4X - Ssh-Server Authentication-Retries; Ssh-Server Enable

SGS-6341 Series Command Guide
1-75
None.
Example:
Set the max connection number supported by the Telnet service as 10.
Switch(config)#telnet-server max-connection 10
1.2.12 ssh-server authentication-retries
Command:
ssh-server authentication-retries <authentication-retries>
no ssh-server authentication-retries
Function:
Configure the number of times for retrying SSH authentication; the “no ssh-server authentication-retries”
command restores the default number of times for retrying SSH authentication.
Parameter:
<authentication-retries > is the number of times for retrying authentication; valid range is 1 to 10.
Command mode:
Global Mode
Default:
The number of times for retrying SSH authentication is 3 by default.
Example:
Set the number of times for retrying SSH authentication to 5.
Switch(config)#ssh-server authentication-retries 5
1.2.13 ssh-server enable
Command:
ssh-server enable
no ssh-server enable
Function:
Enable SSH function on the switch; the “no ssh-server enable” command disables SSH function.
Command mode:
Global Mode
Default:
SSH function is disabled by default.
Usage Guide:
In order that the SSH client can log on the switch, the users need to configure the SSH user and enable SSH
function on the switch.