Planet SGS-6341-24T4X - Show Ipv6 Ospf Neighbor

36-254
Hello due in 00:00:10
retransmission.
Neighbor Count is 1, Adjacent neighbor count is 1 Numbers of the adjacent layer 3 switch; number of
the layer 3 switches established with neighbor
relation
36.33 show ipv6 ospf neighbor
Command:
show ipv6 ospf [<tag>] neighbor [<neighbor_id> | <ifname> detail | detail ]
Function:
Show OSPF adjacent point messages.
Parameter:
<tag> is process tag, which is a character string
<neighbor_id> is the neighbor ID shown in IPv4 address format
detail: Show neighbor details
<ifname> name of the interface
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this command.
Example:
Switch#show ipv6 ospf neighbor
OSPFv3 Process (*null*)
Neighbor ID Pri State Dead Time Interface Instance ID
192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0
192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1
Displayed information
Explanation
Neighbor ID
Neighbor ID
Instance ID
Instance ID
Address
IP address of neighboring layer 3 switch
Interface
Interface the neighbor belongs
State
Neighbor relationship state
Pri
Priority