Planet SGS-6341-24T4X - Match

15-127
Default:
Do not set the action.
Command mode:
Policy class map configuration mode
Usage Guide:
Drop the specified packet after configure this command.
Example:
Drop the packet which satisfy c1.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#drop
Switch(Config-PolicyMap-p1-Class-c1)#exit
Switch(Config-PolicyMap-p1)#exit
15.6 match
Command:
match {access-group <acl-index-or-name> | ip dscp <dscp-list> | ip precedence
<ip-precedence-list> | ipv6 access-group <acl-index-or-name> | ipv6 dscp <dscp-list> | ipv6
flowlabel <flowlabel-list> | vlan <vlan-list> | cos <cos-list>}
no match {access-group | ip dscp | ip precedence| ipv6 access-group| ipv6 dscp | ipv6
flowlabel | vlan | cos}
Function:
Configure the match standard of the class map; the no form of this command deletes the specified
match standard.
Parameter:
access-group <acl-index-or-name> match specified IP ACL, MAC ACL or IPv6 ACL, the
parameters are the number or name of the ACL;
ip dscp <dscp-list> and ipv6 dscp <dscp-list> match specified DSCP value, the parameter is a list
of DSCP consisting of maximum 8 DSCP values, the ranging is 0~63;
ip precedence <ip-precedence-list> match specified IP Precedence, the parameter is a
IP Precedence list consisting of maximum 8 IP Precedence values with a valid range of 0~7;
ipv6 access-group <acl-index-or-name> match specified IPv6 ACL, the parameter is
the number or name of the IPv6 ACL;
ipv6 flowlabel <flowlabel-list> match specified IPv6 flow label, the parameter is IPv6
flow label value, the ranging is 0~1048575;
vlan <vlan-list> match specified VLAN ID, the parameter is a VLAN ID list consisting of