Planet SGS-6341-24T4X - Clear Ip Igmp Group

44-94
44.9 Commands for IGMP
44.9.1 clear ip igmp group
Command:
clear ip igmp group [A.B.C.D | IFNAME]
Function:
Delete the group record of the specific group or interface.
Parameters:
A.B.C.D the specific group address; IFNAME the specific interface.
Command Mode:
Admin Configuration Mode
Usage Guide:
Use show command to check the deleted group record.
Example:
Delete all groups.
Switch#clear ip igmp group
Relative Command:
show ip igmp group
44.9.2 debug igmp event
Command:
debug igmp event
no debug igmp event
Function:
Enable debugging switch of IGMP event; the “no debug igmp event” command disenables the
debugging switch
Default:
Disabled
Command Mode:
Admin Mode
Usage Guide:
Enable debugging switch if querying IGMP event information
Example:
Switch# debug igmp event