EasyManuals Logo

Planet SGS-6341-24T4X User Manual

Planet SGS-6341-24T4X
1206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #969 background imageLoading...
Page #969 background image
48-6
Default Settings:
There is no 802.1x guest-vlan function on the port.
User Guide:
The access device will add the port into Guest VLAN if there is no supplicant getting authenticated
successfully in a certain stretch of time because of lacking exclusive authentication supplicant
system or the version of the supplicant system being too low.
In Guest VLAN, users can get 802.1x supplicant system software, update supplicant system or
update some other applications (such as anti-virus software, the patches of operating system).
When a user of a port within Guest VLAN starts an authentication, the port will remain in Guest
VLAN in the case of a failed authentication. If the authentication finishes successfully, there are two
possible results:
The authentication server assigns an Auto VLAN, causing the port to leave Guest VLAN to join
the assigned Auto VLAN. After the user gets offline, the port will be allocated back into the
specified Guest VLAN.
The authentication server assigns an Auto VLAN, then the port leaves Guest VLAN and joins
the specified VLAN. When the user becomes offline, the port will be allocated to the specified
Guest VLAN again.
Attention:
There can be different Guest VLAN set on different ports, while only one Guest VLAN is
allowed on one port.
Only when the access control mode is portbased, the Guest VLAN can take effect. If the
access control mode of the port is macbased or userbased, the Guest VLAN can be
successfully set without taking effect.
Examples
Set Guest-VLAN of port Ethernet1/0/3 as VLAN 10.
Switch(Config-If-Ethernet1/0/3)#dot1xguest-vlan 10
48.9 dot1x macfilter enable
Command:
dot1x macfilter enable
no dot1x macfilter enable
Function:
Enables the dot1x address filter function in the switch; the "no dot1x macfilter enable" command
disables the dot1x address filter function.
Command mode:
Global Mode

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet SGS-6341-24T4X and is the answer not in the manual?

Planet SGS-6341-24T4X Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlack
Console portRJ-45
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Routing entries128
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresStacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Flash memory16 MB
Internal memory512 MB
Processor frequency400 MHz
AuthenticationMAC-based authentication, Port-based authentication
Security algorithmsSNMPv3, SSH, SSL/TLS
Throughput95.24 Mpps
Jumbo frames9216
Number of queues8
MAC address table16000 entries
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply included-
Power consumption (max)19.9 W
Heat dissipation67.91 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width440 mm
Height43.6 mm
Weight3170 g

Related product manuals