Planet SGS-6341-24T4X - Ip Igmp Snooping Vlan Mrpt

44-112
mrouter port. Deleting static mrouter port can only be realized by the no command.
Example:
Switch(config)#ip igmp snooping vlan 2 mrouter-port interface ethernet1/0/13
44.10.13 ip igmp snooping vlan mrouter-port learnpim
Command:
ip igmp snooping vlan <vlan-id> mrouter-port learnpim
no ip igmp snooping vlan <vlan-id> mrouter-port learnpim
Function:
Enable the function that the specified VLAN learns mrouter-port (according to pim packets), the no
command will disable the function.
Parameter:
<vlan-id>: The specified VLAN ID, ranging from 1 to 4094.
Command Mode:
Global Mode
Default:
Enable
Usage Guide:
Enable the function that the specified VLAN learns mrouter-port (according to pim packets). After a
port received pim packets, it will be set to mrouter port for implementing the automatic learning.
Example:
Disable the function that vlan 100 learns mrouter-port (according to pim packets).
Switch(config)#no ip igmp snooping vlan 100 mrouter-port learnpim
44.10.14 ip igmp snooping vlan mrpt
Command:
ip igmp snooping vlan <vlan-id> mrpt <value>
no ip igmp snooping vlan <vlan-id> mrpt
Function:
Configure this survive time of mrouter port.
Parameter:
vlan-id: VLAN ID, ranging between <1-4094>
value: mrouter port survive period, ranging between <1-65535>seconds
Command Mode: