Planet SGS-6341-24T4X User Manual

36-249
Configure router ID for ospfv3 process. The “no router-id”restores ID to 0.0.0.0.
Parameter:
<router-id>> is the router ID shown in IPv4 format.
Default:
0.0.0.0 by default.
Usage Guide:
If the router-id is 0.0.0.0, the ospfv3 process can not be normally enabled. It is required to configure
a router-id for ospfv3.
Command Mode:
OSPFv3 protocol mode
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf
Switch(config-router)#router-id 192.168.2.1
36.29 router ipv6 ospf
Command:
[no] router ipv6 ospf [<tag>]
Function:
This command initializes the ospfv3 routing prcess and enters ospfv3 mode for configuring the
ospfv3 routing process. The “no router ipv6 ospf [<tag>]” command stops relevant process.
Parameter:
<tag> ospfv3 is the process mark which could be random strings made up of characters and digits
Command Mode:
Global mode
Usage Guide:
To let he ospfv3 routing process work properly, this command must be configured and ospfv3 must
at least be enabled on one interface. When the tag configured by the ipv6 router ospf area
command under interface mode matches with the tag of ospf process, the ospfv3 process is
enabled on this interface.
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf IPI

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g