Planet SGS-6341-24T4X - Show Spanning-Tree Mst Config

14-123
14.2.4 show spanning-tree mst config
Command:
show spanning-tree mst config
Function:
Display the configuration of the MSTP in the Admin mode.
Command mode:
Admin Mode
Usage Guide:
In the Admin mode, this command can show the parameters of the MSTP configuration such as
MSTP name, revision, VLAN and instance mapping.
Example:
Display the configuration of the MSTP on the switch.
Switch#show spanning-tree mst config
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4094
03 30
04 40
----------------------------------