EasyManua.ls Logo

Planet SGS-6341-24T4X - Show Ipv6 Interface

Planet SGS-6341-24T4X
1206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19-192
0 parameter, 0 timestamp, 0 timestamp replies
TCP statistics:
TCP packet statistics.
UDP statistics:
UDP packet statistics.
19.2.32 show ipv6 interface
Command:
show ipv6 interface {brief|<interface-name>}
Function:
Show interface IPv6 parameters.
Parameter:
Parameter brief is the brief summarization of IPv6 status and configuration, and parameter
interface-name is Layer 3 interface name.
Command Mode:
Admin and Configuration Mode
Usage Guide:
If only brief is specified, then information of all L3 is displayed, and you can also specify a specific
Layer 3 interface.
Example:
Switch#show ipv6 interface Vlan1
Vlan1 is up, line protocol is up, dev index is 2004
Device flag 0x1203(UP BROADCAST ALLMULTI MULTICAST)
IPv6 is enabled
Link-local address(es):
fe80::203:fff:fe00:10 PERMANENT
Global unicast address(es):
3001::1 subnet is 3001::1/64 PERMANENT
Joined group address(es):
ff02::1
ff02::16
ff02::2
ff02::5
ff02::6
ff02::9
ff02::d
ff02::1:ff00:10
ff02::1:ff00:1

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Related product manuals