Planet SGS-6341-24T4X - Show Flash; Show History

72-12
OSPF all NSM debugging is on
OSPF all events debugging is on
OSPF all route calculation debugging is on
Switch#
Relative command:
Debug
72.10 show flash
Command:
show flash
Function:
Show the size of the files which are reserved in the system flash memory.
Command Mode:
Admin Mode and Configuration Mode.
Example:
To list the files and their size in the flash.
Switch#show flash
boot.rom 329, 828 1900-01-01 00:00:00 --SH
boot.conf 94 1900-01-01 00:00:00 --SH
nos.img 2, 449, 496 1980-01-01 00:01:06 ----
startup-config 2, 064 1980-01-01 00:30:12 ----
72.11 show history
Command:
show history
Function:
Display the recent user command history.
Command mode:
Admin Mode
Usage Guide:
The system holds up to 20 commands the user entered, the user can use the UP/DOWN key or
their equivalent (ctrl+p and ctrl+n) to access the command history.