Planet SGS-6341-24T4X - Shutdown; Speed-Duplex

SGS-6341 Series Command Guide
4-138
1/0/2 5m 0 0 0 0
5s 0 0 0 0
1/0/3 5m 0 0 0 0
5s 0 0 0 0
1/0/4 5m 0 0 0 0
5s 0 0 0 0
…
4.1.15 shutdown
Command:
shutdown
no shutdown
Function:
Shuts down the specified Ethernet port; the “no shutdown” command opens the port.
Command mode:
Port Mode.
Default:
Ethernet port is open by default.
Usage Guide:
When Ethernet port is shut down, no data frames are sent in the port, and the port status displayed when the user
types the “show interface” command is “down”.
Example:
Opening ports1/0/1-8.
Switch(config)#interface ethernet1/0/1-8
Switch(Config-Port-Range)#no shutdown
4.1.16 speed-duplex
Command:
speed-duplex {auto | force10-half | force10-full | force100-half | force100-full | force100-fx [module-type
{auto-detected | no-phy-integrated | phy-integrated}] | {{force1g-half | force1g-full} [nonegotiate [master |
slave]]}}
no speed-duplex
Function:
Sets the speed and duplex mode for 1000Base-TX, 100Base-TX or 100Base-FX ports; the “no speed-duplex”
command restores the default speed and duplex mode setting, i.e., auto speed negotiation and duplex.