Planet SGS-6341-24T4X - Mac-Address-Table Periodic-Monitor-Time; Show Port-Security

13-90
13.2.2 mac-address-table periodic-monitor-time
Command:
mac-address-table periodic-monitor-time <5-86400>
Function:
Set the MAC monitor interval to count the added and deleted MAC in time, and send out them with
trap message.
Command mode:
Global Mode.
Parameter:
<5-86400>: the interval is 5 to 86400 seconds.
Default:
60 seconds.
Example:
Set the MAC monitor interval as 120 seconds.
Switch(Config)#mac-address-table periodic-monitor-time 120
13.2.3 show port-security
Command:
show port-security
Function:
Display the secure MAC addresses of the port.
Command mode:
Admin Mode and other configuration Mode.
Default:
The switch is not display port-security configuration.
Usage Guide:
This command displays the secure port MAC address information.
Example:
Switch#show port-security
Security Port MaxSecurity Addr CurrentAddr Security Action
(count) (count)
-----------------------------------------------------------------------------------------------------
Ethernet1/0/1 1 1 Protect
Ethernet1/0/3 10 1 Protect
Ethernet1/0/5 1 0 Protect