Planet SGS-6341-24T4X - Show Snmp User

SGS-6341 Series Command Guide
1-87
Function:
Display SNMP configuration information.
Command mode:
Admin and Configuration Mode.
Example:
Switch#show snmp status
Trap enable
RMON enable
Community Information:
V1/V2c Trap Host Information:
V3 Trap Host Information:
Security IP Information:
Displayed information
Description
Community string
Community string
Community access
Community access permission
Trap-rec-address
IP address which is used to receive Trap.
Trap enable
Enable or disable to send Trap.
SecurityIP
IP address of the NMS which is allowed to
access Agent
1.4.10 show snmp user
Command:
show snmp user
Function:
Display the user information commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp user
User name: initialsha
Engine ID: 1234567890
Auth Protocol:MD5 Priv Protocol:DES-CBC
Row status:active
Displayed Information
Explanation
User name
User name