Planet SGS-6341-24T4X User Manual

SGS-6341 Series Command Guide
6-145
MAC address of the port.
Default:
Disable the function of loopback diction control.
Command Mode:
Port Mode.
Usage Guide:
If there is any loopback, the port will not recovery the state of be controlled after enabling control operation on the
port. If the overtime is configured, the ports will recovery normal state when the overtime is time-out. If the control
method is block, the corresponding relationship between instance and vlan id should be set manually by users, it
should be noticed when be used.
Example:
Enable the function of loopback detection control under port1/0/2 mode.
Switch(config)#interface ethernet 1/0/2
Switch(Config-If-Ethernet1/0/2)#loopback-detection control shutdown
Switch(Config-If-Ethernet1/0/2)#no loopback-detection control
6.3 loopback-detection control-recovery timeout
Command:
loopback-detection control-recovery timeout <0-3600>
Function:
This command is used to recovery to uncontrolled state after a special time when a loopback being detected by the
port entry be controlled state.
Parameters:
<0-3600> second is recovery time for be controlled state, 0 is not recovery state.
Default:
The recovery is not automatic by default.
Command Mode:
Global Configuration Mode.
Usage Guide:
When a port detects a loopback and works in control mode, the ports always work in control mode and not recover.
The port will not sent packet to detection in shutdown mode, however, the port will sent loopback-detection packet to
detection whether have loopback in block or learning mode. If the recovery time is configured, the ports will recovery
normal state when the overtime is time-out. The recovery time is a useful time for shutdown control mode, because
the port can keep on detection loopback in the other modes, so suggest not to use this command.
Example:

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g