EasyManuals Logo

Planet SGS-6341-24T4X User Manual

Planet SGS-6341-24T4X
1206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1011 background imageLoading...
Page #1011 background image
52-10
command deletes the key for RADIUS server.
Parameters:
<string> is a key string for RADIUS server, up to 16 characters are allowed.
Command mode:
Global Mode
Usage Guide:
The key is used in the encrypted communication between the switch and the specified RADIUS
server. The key set must be the same as the RADIUS server set, otherwise, proper RADIUS
authentication and accounting will not perform properly.
Example:
Setting the RADIUS authentication key to be “test”.
Switch(config)#radius-server key test
52.15 radius-server retransmit
Command:
radius-server retransmit <retries>
no radius-server retransmit
Function:
Configures the re-transmission times for RADIUS authentication packets; the “no radius-server
retransmitcommand restores the default setting.
Parameters:
<retries> is a retransmission times for RADIUS server, the valid range is 0 to 100.
Command mode:
Global Mode
Default:
The default value is 3 times.
Usage Guide:
This command specifies the retransmission time for a packet without a RADIUS server response
after the switch sends the packet to the RADIUS server. If authentication information is missing from
the authentication server, AAA authentication request will need to be re-transmitted to the
authentication server. If AAA request retransmission count reaches the retransmission time
threshold without the server responding, the server will be considered to as not work, the switch
sets the server as invalid.
Example:
Setting the RADIUS authentication packet retransmission time to five times.

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet SGS-6341-24T4X and is the answer not in the manual?

Planet SGS-6341-24T4X Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlack
Console portRJ-45
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Routing entries128
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresStacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Flash memory16 MB
Internal memory512 MB
Processor frequency400 MHz
AuthenticationMAC-based authentication, Port-based authentication
Security algorithmsSNMPv3, SSH, SSL/TLS
Throughput95.24 Mpps
Jumbo frames9216
Number of queues8
MAC address table16000 entries
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply included-
Power consumption (max)19.9 W
Heat dissipation67.91 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width440 mm
Height43.6 mm
Weight3170 g

Related product manuals