69-10
Reference clock server: 1.1.1.2
Clock offset: 0.010 s
Root delay: 0.012 ms
Root dispersion: 0.000 ms
Reference time: TUE JAN 03 01:27:24 2006
69.19 show ntp session
Command:
show ntp session [<ip-address> | <ipv6-address>]
Function:
To display the information of all NTP session or one specific session, include server ID, server layer,
and the local offset according to server. (The symbol * means this server is the selected local time
source)
Parameter:
ip-address: The IPv4 address of some specifics configured time server.
ipv6-address: The IPv6 address of some specifics configured time server.
If no parameter, the session relative information of all servers will be displayed (Include broadcast
and multicast servers)
Command Mode:
Admin and Configuration Mode.
Example:
(Switch)# show ntp session
server stream type rootdelay rootdispersion trustlevel
* 1.1.1.2 2 unicast 0.010s 0.002s 10
2.2.2.2 3 unicast 0.005s 0.000s 10
To Next Page
Loading...
