77-7
77.8 show vsf cpu-database member
running-information
Command:
show vsf cpu-database [member <1-16>| running-information]
Function:
Display CPU database operation information.
Parameters:
< member >: VSF member, <1-16>: VSF member member id.
Default:
None.
Command Mode:
Admin and Configuration Mode.
Operation Mode:
VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
Display entire or particular member operation information in CPU database.
Example:
Switch# show vsf cpu-database member 1 running-information
%Member 1 not exist in the cpu-database!
Switch# show vsf cpu-database member 2 running-information
Vsf cpu database member 2 running information:
Flags: 1
Tx unit: 0
Tx port: 0
Dest module: 2
Dest port: 0
Module ID: 2
Topo index: 0
Vsf port index 1 link info:
Flags: 0
Tx cpu key:
Tx port-group: 0
Rx cpu key:
To Next Page
Loading...
