78-19
Examples:
Display the current global PoE status
Switch#show power inline
Power Inline Status: On
Power Available: 370 W
Power Used: 0 W
Power Remaining: 370 W
Min Voltage: 44 V
Max Voltage: 57 V
Police: Off
Legacy: Off
Disconnect: Ac
Mode: Signal
HW Version: 30
78.2.1.2 show power inline interface ethernet
Command:
show power inline interface [ethernet <interface-number> | <interface-name>]
Function:
Display the PoE configuration and status on specified ports.
Parameters:
Interface-list: a list of specified ports, specifying all ports by default.
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
The meaning of each field is listed in the following table.
Status Power supply status
Enable: Power supply enabled
Disable: Power supply disabled
Oper Working status
On: PD is normally connected and powered
To Next Page
Loading...
